TECNICOS.SHOP Apps

Reboot into special modes

From the browser, with the device connected over USB, or with the key guide by brand.

This browser can't connect over USB. Use Chrome or Edge on a computer, or Chrome on Android with an OTG cable. Meanwhile, use the guide by brand.

Before connecting: on the phone, turn on USB debugging (Settings → Developer options). If ADB or a repair program is open on the computer, close it: the device only talks to one program at a time. Windows needs the device's USB driver.

Reboot into:

What's happening

    The connection is direct between your browser and the device: nothing goes through our server. The debugging key is stored only in this browser.

    Key combinations vary by model. If one doesn't work, try with the device fully off and the cable plugged in or out.

    Generic Android and Google Pixel · Any chipset

    Mode
    Bootloader / fastboot
    How to enter
    Powered off: volume down + power.
    Command or tool
    adb reboot bootloader · fastboot reboot-bootloader
    How to leave
    Choose «Start» in the menu or: fastboot reboot
    Mode
    Fastbootd
    How to enter
    No key combo: enter by command.
    Command or tool
    adb reboot fastboot · fastboot reboot-fastboot
    How to leave
    fastboot reboot
    Note
    Devices launched with Android 10 or later (dynamic partitions).
    Mode
    Recovery
    How to enter
    From the bootloader menu, choose «Recovery mode». On «No command»: hold power and tap volume up.
    Command or tool
    adb reboot recovery · fastboot reboot-recovery
    How to leave
    «Reboot system now»
    Mode
    Sideload
    How to enter
    Recovery → «Apply update from ADB».
    Command or tool
    adb reboot sideload
    How to leave
    Ends by itself after installing, or «Reboot system now».
    Note
    To install an official package with adb sideload.

    Samsung · Exynos, Snapdragon and MediaTek

    Mode
    Download (Odin)
    How to enter
    Recent models: powered off, hold volume up + volume down and plug in the USB cable; at the warning, volume up. Models with a home button: volume down + home + power.
    Command or tool
    adb reboot download
    How to leave
    Hold volume down + power for about 7 seconds.
    Note
    Samsung doesn't use fastboot: firmware is flashed in this mode.
    Mode
    Recovery
    How to enter
    Powered off with the USB cable connected: volume up + power until the logo.
    Command or tool
    adb reboot recovery
    How to leave
    «Reboot system now».
    Note
    On recent models it won't enter without the cable connected.

    Xiaomi, Redmi and POCO · Snapdragon and MediaTek

    Mode
    Fastboot
    How to enter
    Powered off: volume down + power.
    Command or tool
    adb reboot bootloader
    How to leave
    Hold power about 10 seconds or: fastboot reboot
    Note
    Used by MiFlash for fastboot ROMs.
    Mode
    Recovery
    How to enter
    Powered off: volume up + power.
    Command or tool
    adb reboot recovery
    How to leave
    «Reboot» menu.
    Mode
    EDL (Snapdragon)
    How to enter
    Through a board test point or a deep flash cable.
    Command or tool
    fastboot oem edl (old models only) · adb reboot edl (if not blocked)
    How to leave
    Hold power for over 10 seconds.
    Note
    On current models, flashing in EDL requires an account authorized by Xiaomi.
    Mode
    BROM (MediaTek)
    How to enter
    Powered off: hold volume up + volume down and plug in the cable.
    Command or tool
    PC tools (SP Flash Tool, mtkclient).
    How to leave
    Unplug and hold power.
    Note
    See MediaTek too.

    Motorola · Snapdragon and MediaTek

    Mode
    Bootloader / fastboot
    How to enter
    Powered off: volume down + power.
    Command or tool
    adb reboot bootloader
    How to leave
    Choose «Start» or: fastboot reboot
    Note
    Used by the official rescue tool.
    Mode
    Recovery
    How to enter
    From the bootloader, choose «Recovery mode». On «No command»: hold power and tap volume up.
    Command or tool
    adb reboot recovery · fastboot reboot-recovery
    How to leave
    «Reboot system now».

    Huawei and Honor · Kirin

    Mode
    Fastboot
    How to enter
    Powered off with the cable connected to the PC: hold volume down.
    Command or tool
    adb reboot bootloader
    How to leave
    Hold power about 10 seconds.
    Mode
    eRecovery / recovery
    How to enter
    Powered off with the cable connected: volume up + power.
    Command or tool
    adb reboot recovery
    How to leave
    «Reboot» menu.

    Qualcomm (any brand) · Snapdragon

    Mode
    EDL 9008
    How to enter
    Depending on the model: a board test point, or volume up + volume down while plugging in the cable with the device off.
    Command or tool
    adb reboot edl · fastboot oem edl (when the manufacturer didn't block them)
    How to leave
    Hold power (or power and volume) for over 10 seconds.
    Note
    The PC sees it as «Qualcomm HS-USB QDLoader 9008». Used with the model's programmer (firehose).

    MediaTek (any brand) · Helio, Dimensity

    Mode
    BROM
    How to enter
    Powered off: hold volume up, volume down or both (depending on the model) and plug in the cable.
    Command or tool
    PC tools: SP Flash Tool, mtkclient.
    How to leave
    Unplug and hold power.
    Note
    The PC sees it as «MediaTek USB Port». It's the lowest mode and works even if the system doesn't boot.
    Mode
    Preloader
    How to enter
    Powered off: plug in the cable without pressing keys.
    Command or tool
    SP Flash Tool uses it just by connecting.
    How to leave
    It leaves by itself after a few seconds.
    Mode
    META
    How to enter
    With the device off, from a PC tool that requests it during boot.
    Command or tool
    PC tools (for example mtkclient or MediaTek's own).
    How to leave
    Reboot from the tool or hold power.
    Note
    Used for calibration and to repair NVRAM and IMEI with the manufacturer's official tools.
    Mode
    Factory mode
    How to enter
    On some models: powered off, volume up (or down) + power shows a menu with «Factory Mode».
    How to leave
    Reboot option in the menu.
    Note
    Manufacturer hardware tests.

    Unisoc (Spreadtrum) · SC, T606, T612...

    Mode
    Download (SPD)
    How to enter
    Powered off: hold volume down (or volume up, depending on the model) and plug in the cable.
    Command or tool
    PC tools: ResearchDownload, UpgradeDownload.
    How to leave
    Unplug and hold power.
    Note
    Needs the SPD drivers on the PC.
    Mode
    Recovery
    How to enter
    Powered off: volume up + power.
    Command or tool
    adb reboot recovery
    How to leave
    «Reboot system now».

    Apple (iPhone) · A series

    Mode
    Recovery
    How to enter
    iPhone 8 and later, connected to the computer: press and release volume up, press and release volume down, then hold the side button until the computer screen appears.
    Command or tool
    Finder (Mac) or iTunes / Apple Devices (Windows).
    How to leave
    Hold the side button until it turns off, or choose update or restore.
    Note
    To restore or update iOS. It doesn't remove iCloud activation.
    Mode
    DFU
    How to enter
    iPhone 8 and later, connected: volume up, volume down, hold side 10 seconds, add volume down 5 seconds, release side and keep volume down 10 seconds. The screen stays black.
    Command or tool
    Finder or iTunes detect a device in recovery.
    How to leave
    Volume up, volume down and hold side until the Apple logo.
    Note
    Full firmware restore.

    Device stuck in a mode or not booting?

    We help you remotely

    Fastboot, recovery, sideload, download, EDL, BROM and META are boot modes used to flash firmware, recover a device that won't start or do software repairs. Each brand and chipset has its own and a different way to enter them.

    With the phone connected over USB, this tool reboots it into the mode you choose straight from Chrome or Edge, using the same protocols as ADB and fastboot, with nothing to install. If the device is on with USB debugging enabled, it can be sent to bootloader, recovery, sideload, fastbootd, Samsung download or EDL when the manufacturer allows it. If it is already in fastboot, it can be sent to recovery, fastbootd, the system or EDL on models that accept it.

    For modes that can't be requested by software, such as MediaTek BROM and META or Unisoc download, the guide shows the keys, the PC tool and how to leave, by brand and chipset.

    Frequently asked questions

    Which browser do I need?

    Chrome or Edge on a Windows, Mac or Linux computer, or Chrome on Android with an OTG cable. Safari and Firefox can't connect over USB.

    Why doesn't my phone show up?

    It must have USB debugging on, or be in fastboot. If ADB or another repair program is open on the computer, the device is taken: close it. Windows needs the manufacturer's USB driver.

    Why doesn't rebooting to EDL work?

    Many manufacturers block that request. Then you enter through a test point or keys, as the guide shows.

    Does this erase anything?

    No. It only reboots into another mode. What you do afterwards in that mode (flashing firmware, wiping data) can erase.