EFT Pro Dongle — Update V5.5.3 [Apple]

EFT Pro Dongle — Update V5.5.3
[Apple]

A12 / A13 Boot Diagnostics & Factory Erase Support

Release Date: 10-07-2026

🍏 Apple — Purple Mode

Added new operations for supported Apple A12 / A13 devices,
powered by the usbliter8 RP2350 Hardware Pwner:

• 🆕 Boot Diag – Boot the device into Apple Factory Diagnostics Mode. BETA

• 🆕 Erase – Read Serial Number, Wi-Fi MAC, Bluetooth MAC, and Ethernet MAC, then trigger a Factory-Level Wipe on the next boot. BETA

📱 Supported Models

• iPhone XS
• iPhone XS Max
• iPhone XR
• iPhone 11
• iPhone 11 Pro
• iPhone 11 Pro Max
• iPhone SE (2nd generation)
• iPad Air (3rd generation)
• iPad mini (5th generation)
• iPad (8th generation)
• iPad (9th generation)

⚠️ Requirements

• Boot Diag and Erase require a compatible RP2350-based Hardware Pwner running usbliter8 firmware.

• You can use the new Prepare usbliter8 Board operation to automatically detect and flash supported RP2350 boards with the required firmware.

• Before running Boot Diag or Erase, the target iPhone or iPad must first be successfully placed into Pwned DFU Mode using the usbliter8 Hardware Pwner.

🔌 Supported RP2350 Boards

• Waveshare RP2350 USB-A
• Waveshare RP2350 Zero
• Pimoroni TINY2350
• Raspberry Pi Pico 2

Note: Any compatible RP2350-based board flashed with usbliter8 firmware
may also be used.

💡 Usage Flow

1. Connect the RP2350 Hardware Pwner to the PC.
2. Put the iPhone / iPad into DFU Mode, then connect it to the RP2350 USB-A port.
3. Disconnect and reconnect the RP2350 board to the PC to start the pwn process.
4. Wait until the device is successfully placed into Pwned DFU Mode.
5. Select Boot Diag → the device boots into Apple Factory Diagnostics Mode.
6. Select Erase → a Factory-Level Wipe is triggered on the next boot.